The Tuxedo Hutch

I don’t do many hutches. They are very time and resource consuming so prices are not as affordable as dressers and smaller pieces. As a result, customers don’t usually order them and even though it’s not hard to find beautiful ones for sale at a very low price, I simply don’t have space to paint one then keep it in my house for several months until a buyer falls in love with it despite the price.

This one was a custom order. It has been with this family for 16 years and is one of those beautiful, sturdy pieces from a high-end furniture store that costed a fortune back when they bought it, so getting rid of it was not an option. The hutch’s structure was in like-new condition, but it was time for a fresh look, and I was the lucky lady to get the job!

 

BeforeAfter

Over all, the painting process went well, but when it was time to seal it, something very annoying happened. I applied polyurethane over the black areas because I wanted a tough, durable sealer but, strangely, even after 24 hours after I sealed it, the whole black surface was still sticky and would attract every single piece of lint and dust that came close to it. Wiping and dusting only made things worse. Ugh! I would have to paint it all over again!!!!

Off I went to Lowes, determined to find and pay whatever the price was for the-best-of-the-world black paint that would not require any sealer, as I was not going to take any chances the second time around. It turns out such paint does exist, and now that I found out about it, I am thankful my project didn’t work out the first time.

This is the miracle paint.

Valspar.png

This thing checks all boxes! I’m still trying to think of any drawbacks because it is too good to be true.

  • No primer needed (though I always prime my pieces due to traumatizing bleeding experiences in the past)
  • No sealing needed
  • Dries super quickly
  • Beautiful smooth finish with a paint sprayer, foam roller and paintbrush (yes, I used all of them in this project)
  • Ultra durable (it’s meant for interior and exterior)
  • All Valspar colors to choose from
  • Enriched with oil, BUT  washable with soapy water (for real)
  • Same price or cheaper than regular latex paint ($24 a quart)
  • No smell at all

Well, maybe there is one little problem. I have to drive 30 minutes to Lowes to get it as my local hardware store doesn’t have it YET.

*** (update) Check my next post to see how was my second experience with this paint.***

Oh Valspar Furniture Paint, where have you been all these years?

No, this is NOT a sponsored post. Valspar have no idea I am crazy in love with their new paint. I just need to share this information because I don’t want them to ever consider discontinuing this wonderful product. The more people buying it, the better for me!

Enough about the paint. It is picture time! Let me know what you think of this big guy in its brand new tuxedo.

DSC_0418

DSC_0419

DSC_0423DSC_0427

DSC_0432

The color on the inside is Behr “white”.

DSC_0435

Thanks for reading!

Love,

Patricia.

 

 

 

 

 

 

Advertisements

Posted by

It all started in the spring of 2013. I realized how tired I was to see my house entirely decorated with IKEA stuff. Nothing against IKEA, but after 12 years, I just needed some change. I wanted stylish, original furniture, but noticed that everything I liked from retail stores was way out of my budget. Thanks to Google, Youtube, and a couple of amazing blogs, I was able to discover and explore the world of furniture refinishing, and it was the beginning of my addiction. I now spend my days rescuing old, dull, unwanted pieces of furniture to give them a fresh look so they can be displayed, used and loved again for many more years to come. Thanks for stopping by.

25 thoughts on “The Tuxedo Hutch

  1. Very pretty! I love the black. I just saw that Valspar paint today at Lowe’s! I didn’t have time to stop and read the label but it did catch my interest. Great to hear that it’s good paint. I guess it went over the sticky paint and all was well?

    Liked by 1 person

  2. Patricia! This is so gorgeous and grand! So much better in black! It really gives it a rich feel. I bet your clients are pleased 🙂 You did a lovely job on it! I hope you have a great weekend!
    Smiles!
    Terry

    Liked by 1 person

    1. Thanks Christina! I don’t know the answer to your question, and couldn’t find that information on the can either. I use BM regular latex paint a lot, but never tried BM’s Advance. I read your post a while ago about your breakup with BM and was a little discouraged to try. I love the high-gloss on your pieces (I’m a BIG fan of your work btw), but I don’t think this new line by Valspar has a gloss sheen. This one is satin, which is my favorite anyways, so I didn’t bother checking. I hope you try this one and share your opinion on your blog. I just bought another can in Ivory to paint a bedroom set and can’t wait to start. Let’s see how long my honeymoon with Vaspar FP will last.

      Liked by 1 person

      1. Thank you, and thank you for the response! I have also had very good luck with BM’s regular latex (I think it was Aura?). Other painters have mentioned that BM’s Advance in a Satin finish is much easier to work with – just FYI in case you want to try it out. I will definitely give it a try and share any feedback on the blog. 🙂

        Liked by 1 person

      2. Great! A quick note to say I used the paint again and had a few hiccups as I tried to use it with no primer and a sponge roller. It didn’t work so well, so I went back to the paint sprayer and it was all good and beautiful again!

        Like

    1. Thanks Melissa! Tried the paint for a second time and have to admit it’s not so good without a primer and applied straight with a sponge roller. I used the paint sprayer again and got the same beautiful result as first time. So… not as perfect as I thought but I’ll still be using it 🙂

      Like

    1. Thanks Debra! I tried that paint again. Wasn’t so perfect the second time with no priming and a foam roller, so I went back with the paint sprayer and it worked beautifully. Will share more details soon 🙂

      Like

  3. Great post, thank you! I just bought some of the Valspar FP for a set of dining chairs. The can says to not thin the product but I know I will need to thin for my sprayer to work well. I contacted Valspar customer service and asked them what to think with (water vs. paint thinner). They declined to answer and basically said don’t do it!

    You said you sprayed parts of this project, did you think and if so with what? I take it you have had no long term issues with durability?

    Like

    1. Hi Matt,

      Yes, people at my hardware store also said I should not add water to it. I added it anyways and it worked fine for me in the black color. I did the same with a light color and the result was not so good. I’ll try to spray without thinning it next time to see how it works.
      In terms of durability, it is the best product I’ve tried so far. I even painted the cabinets in my bathroom with it many months ago and it still looks new.
      Let me know how is your experience with it!

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s